Input Data Options tomographic data (1) segmented data (2) burn data (3) medial axis data (4) throat data (5) pore-throat network data (6) fluid data (7) lattice Boltzmann simulation (8) Enter choice: 7 Data Processing Options histogram pore space (1) fluid segmentation (2) fluid sat distribution (3) fluid sat transition matrix (4) fluid blob distribution (5) saturation gradients (6) subvolume fluid saturation (7) fluids visualization/interface area computation (8) comparative rasterplot (9) fluid blob pore/throat span (10) fluid blob surfaces (11) clean up fluid seg data (12) (residual) fluid local depth distribution (13) Enter choice: 8 Enter number of fluid phases within pores(2(dflt),3): 2 Enter basename for pore segmented volume file(s): ../../sw/c_seg/sw Are file(s) compressed? [y,n]: y Enter first and last slice of data to use: 1 256 Slice size of data, (nx,ny): 256 256 Fiducial polygon generation methods NONE (N) MANUAL (M) AUTOMATIC (A) Enter method: N Enter basename for water segmented volume file(s): ../fld_seg/h2o/sor Are file(s) compressed? [y,n]: y Enter basename for oil segmented volume file(s): ../fld_seg/oil/sor Are file(s) compressed? [y,n]: y Image format options 1) Rasterfile plot (2D, default) 2) Geomview plot (3D, interface surface btw two fluids) 3) Fluid/fluid interface area computation only Enter choice: 2 Enter voxel length in physical units: 4.93 after set_fld_seg_data_vol() 16777216 total voxels 2578840 voxels of type H2O (1) 487578 voxels of type OIL (2) 0 voxels of type AIR (16) 0 voxels of type THROAT (4) 13710798 voxels of type ROCK (8) 0 voxels of type UNBURNED(32) 0 voxels of type BURNED (64) 0 voxels of type EXTERIOR(128) Fluid statistics percent exterior 0 porosity 18.2773 water saturation 84.0994 Dependable on the rock, one of the fluid phases is wetting and the other(s) are nonwetting. Wetting fluid is assumed 26-connected and non-wetting fluid is 6-connected. Fluid options are 1) water 2) oil Enter wetting fluid: 1 Surface triangulation visualization can be computationally demanding. Compute only on a subvolume? (y,n(dflt)): y Enter basename for surface output file(s): ../plots/w_o_interfc Resize information selection. NOTE, row and column numbers begin from 0 For each slice, enter first and last column of data to use (x-dir): 0 86 enter first and last row of data to use (y-dir): 0 62 enter first and last slice of data to use (z-dir): 22 154