In the simulaton below, the filament was initially placed
transmurally (vertically). The scrol wave is inverted to give clockwise
scrol wave.
The fiber angle is measured from the positive x-axis.
Counter clockwise is the positive angle direction.
The first angle is the orientation of fiber in the bottom plane
and second one is for the top plane.
The domain 15mm x 15mm x 15 mm is
discretized into 60 x 60 x 60 unless mentioned otherwise.
MONODOMAIN SIMULATION
(b). With fiber rotation.
The last three plots are the xy-, xz-, and yz- projections of the
filament in the second plot.
(b1)
The angle varies from 60 to -40.
Largely remains transmural.
(input)
(b2).
The angle varies from 60 to -60.
Largely remains transmural.
(input)
(b3).
The angle varies from 60 to -100.
Largely remains transmural.
(input)
(b4).
The angle varies from 60 to -120.
Becomes partly intramural. Escapes through bottom plane.
(input)
(b4).
The angle varies from 60 to -120. The initial filament was placed
at the center of the domain. It remains transmural this time.
(input)
